Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Enterprise Homeowners
Creosote builds up quietly in a flue whether you burn wood every week or only a handful of times each winter, and in a desert climate like Enterprise’s, it can sit there for months between fires before anyone notices. That’s the problem a proper sweep solves. Our technicians have up to 13 years of experience with wood-burning fireplaces, gas fireplaces, and wood stoves, and we work exclusively in the chimney trade. We use professional-grade materials specified by name – DuraFlex liners, HeatShield resurfacing, Gelco caps, Copperfield parts – because that’s what specialists specify. Sweep, repair, and inspect all come from one company, so nothing gets referred out. Call (855) 752-5896 to book a sweep. We answer 24/7, with fast dispatch from 7am to 7pm.
Chimney Sweep Services
Chimney Sweep Services cover the full cycle of keeping a flue clean, sound, and safe to use, and they’re what you want when you can’t remember the last time the chimney was opened up and looked at. In Enterprise, a typical sweep runs $150-$300 depending on the appliance and how much buildup is inside. We brush the flue, remove creosote and soot, check the firebox and damper, and look at the cap and crown while we’re up there. A camera inspection and photo report are included so you see exactly what we found. Every visit ends with a flat price agreed before any repair work is booked.
What a Standard Sweep Covers
We brush the full length of the flue with the right size and stiffness of brush for your liner type, then vacuum the firebox and surrounding area so nothing drifts into the room. The damper gets checked for smooth operation, and the cap and spark screen are examined for damage or blockage. You get a written record of what was cleaned and what condition it was in.

When to Book a Sweep
Book before your first fire of the season, or if you’ve burned more than a cord of wood since the last cleaning. A sweep is also worth scheduling before you sell a home or after buying one, since nobody can tell you the last time the previous owner did it. If you’ve noticed a strong smoky smell on warm days, that’s another reason to book.

Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning goes a step beyond a quick brush-down: it’s the full removal of soot, creosote, and debris from the flue, firebox, smoke chamber, and damper area, and it’s what keeps a wood-burning system drawing properly. Most Enterprise homes need it once a year with regular use, and more often if you burn green wood or a lot of softwood. Pricing is typically $150-$300 for a standard clean, with a camera inspection and photo report included. Our technicians have up to 13 years of experience reading creosote stages, which matters because glazed creosote doesn’t brush out and needs different treatment. We’ll tell you plainly which stage you’re at.
Creosote Grades and What They Mean
Stage one creosote is a light soot that brushes away easily. Stage two is flaky and crusty, still brushable but a sign the flue is running cool. Stage three is glazed and tar-like, and it’s the grade that raises real fire risk because it can’t be swept off with a brush alone. Knowing which one you have changes the plan, and you’ll see the photos.
Why the Smoke Chamber Matters
The smoke chamber is the sloped space above the damper, and it collects soot that a straight flue brush never reaches. It’s a common source of smoky draft and a place where creosote hides. We address it as part of the clean when the design of your fireplace allows access.
Fireplace Cleaning
Fireplace Cleaning handles the firebox itself, the hearth, the glass, the grate, and the surrounding masonry, and it’s the part of chimney care most homeowners notice day to day. It’s worth booking when ash and soot have built up on the firebox walls, when glass doors are hazy and hard to see through, or at the end of the burning season before everything sits until fall. Most fireplace cleanings in Enterprise run $150-$300 when paired with a flue sweep. We clean the firebox, clear the ash pit, wipe down glass and doors where present, and check the refractory panels and firebrick for cracks while everything’s exposed. Nothing gets covered up.
Wood-Burning Fireboxes
Wood fireboxes take on soot and creosote on the walls and around the damper throat, and the firebrick joints can crack with heat cycling. We clean the surfaces and inspect the brick and mortar so you know whether the firebox itself is sound. Ash pit doors and cleanouts get cleared so future cleanings are easier.
Glass Doors and Screens
Hazy glass and clogged screens cut down both the view and the airflow the fire needs to burn cleanly. We clean glass with products safe for the door’s finish and clear screen mesh so it draws properly. Damaged gaskets and cracked glass get flagged rather than ignored.
Chimney Services
Chimney Services from Chimney Sweep Enterprise cover three categories only – sweep, repair, and inspection – which is deliberate, because the chimney is a single system and splitting it across three contractors is how problems get missed. You want these services when something has changed: a smoky fire, a water stain on the ceiling, a cracked crown, or a flue that hasn’t been looked at in years. Sweeps start around $150-$300 and repairs are quoted per job from the inspection findings. We specify DuraFlex liners and HeatShield resurfacing because they’re what professionals choose for longevity, not the cheapest upfront option. It’s built to last, not just to pass inspection.
Sweep, Repair, and Inspect Together
Because all three services come from the same company, findings from an inspection get acted on rather than handed to someone else. That closes the loop between what we see on camera and what actually gets fixed. You’re not scheduling a second visit to a second trade.

Repair Work We Handle
We reline flues with DuraFlex, resurface damaged flue interiors with HeatShield, reset and seal crowns, and fit Gelco caps and Famco ventilation components. Smaller parts come through Copperfield and Olympia Chimney supply lines. Everything in that list is chimney work and nothing outside it.
Chimney Sweep Certified
Chimney Sweep Certified means the person on your roof is trained and equipped specifically for chimney work, not a general handyman adding a brush to the truck. It matters most when the stakes are highest: a liner that’s been misidentified, a flue sized wrong for the appliance, or creosote that needs the right treatment. Our technicians have up to 13 years of experience, and they work only in this trade. A certified-level sweep in Enterprise is typically $150-$300 and includes a camera inspection with photos you keep. We’ll always tell you what can safely wait, and what shouldn’t.
Why Trade-Specific Training Counts
A chimney has a flue, a smoke chamber, a damper, a crown, and a cap, and each one fails in its own way. Someone who works on all of them every day reads those failures faster than a generalist. That’s the difference between a report that lists issues and a report that explains them.
What the Camera Shows You
We run a camera down the flue and photograph what we see, then walk you through it on screen or in the report. You don’t have to take our word for a crack, a gap, or a creosote grade. Call (855) 752-5896 to book a certified-level sweep and see for yourself.
Gas Fireplace Cleaning
Gas Fireplace Cleaning addresses what a wood-focused sweep wouldn’t: the burner, the logs or media, the glass, and the venting, all of which collect dust, soot, and spider activity that can affect how the flame performs. Gas fireplaces still need service even though they don’t make creosote, and most manufacturers of vented units recommend an annual check. Enterprise homes with vented gas fireplaces usually pay $150-$300 for cleaning and inspection together. We clear the burner ports, clean the glass, check the logs for soot buildup, and inspect the venting and termination for blockages. Gas work stays with trained technicians – we don’t hand out how-to steps for line connections.
Flame Quality and Soot
A healthy gas flame is clean and mostly blue, and yellow tips or black soot on the logs point to a burner or airflow issue. We clean the ports and media and check the burner pattern so the fire burns as designed. That’s the part a standard dusting never catches.
Venting and Termination Checks
Vent termination caps and the vent run outside the firebox can be blocked by nests, debris, or corrosion, and a blocked vent is a real safety concern. We inspect the venting and the cap as part of the service. If something’s wrong, you’ll see it in the report and we’ll quote the fix on the spot.
Chimney Maintenance
Chimney Maintenance is the annual rhythm of sweep, inspect, and address small problems before they become structural ones, and it’s what keeps a chimney reliable across seasons. In Enterprise, that means a sweep and inspection before burning season, a look at the crown and cap after the summer sun and monsoon wind have done their work, and a plan for anything the inspection flags. Routine maintenance typically runs $150-$300, and it replaces the surprise cost of a repair you didn’t see coming. Our technicians have up to 13 years of experience spotting the early signs – a hairline crown crack, a loose cap, a shrinking mortar joint – and they’ll show you all of them. Then you decide.
The Annual Before-Burning-Season Check
Scheduling a sweep and inspection before the first fire means you’re not discovering a problem mid-winter when the fireplace is the only heat in the room. It’s also the cheapest time to plan a repair instead of reacting to one. The urgency here is seasonal, not hourly.
Crown, Cap, and Flashing Attention
The crown and cap take the most weather of any part of the chimney, and small cracks or lifted flashing let water in over time. We check all three every visit and quote repairs when they’re warranted. If it’s something that can safely wait a season, we’ll say so.
Brands We Service
We install and service DuraFlex flexible liner systems and know exactly where they wear – at the top plate, at the appliance connection, and where the liner bends around an offset. HeatShield resurfacing is our repair of choice for flue interiors because it’s designed to extend flue life rather than coat over a problem. Gelco caps and Famco ventilation components are what we specify for the top of the chimney, and we know how each one ages and seals.
Smaller specialty parts come through Copperfield and Olympia Chimney supply lines, which gives us traceability on the pieces most other shops leave generic. We’re not a dealer for any single brand, and we don’t claim to be – we just work with each of these lines daily and know them well. Whether you have a DuraFlex liner, a HeatShield-treated flue, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoky smell inside the house on warm days. That’s draft reversed and pushing creosote odor back into the room, often a sign the flue is restricted or the buildup is heavy. It’s a reason to book a sweep, not to wait until fall.
- A smoky fire that won’t draw. A weak draft, smoke rolling into the room, or a fire that dies down when it shouldn’t can point to a blockage, a damaged flue, or a smoke chamber full of soot. It’s worth having someone look before you light another fire.
- Visible creosote, especially glazed or tarry. Stage three creosote doesn’t brush out and it’s a real fire hazard. That grade needs a trained eye and the right treatment, not a DIY scrub.
- Cracks in the firebox, flue, or crown. Cracks let water in and, in the flue, can expose the structure around it to heat. Don’t run a fire until it’s been inspected and photographed. Please don’t go up on the roof yourself to check – steep and height work is where people get hurt.
- Water stains or a leak after rain. Stains on the ceiling near the chimney usually mean the crown, cap, or flashing has failed. Fixing it early is cheap; leaving it is how a chimney turns into masonry work.
Our Process, Step by Step
- 1
Book and agree a flat price. We take your details, understand what you’re burning and how often, and set a flat price before anyone arrives. You know the cost of the sweep before the appointment, not after.
- 2
Sweep the full system. We lay drop cloths, brush the flue with the right brush for your liner type, clean the firebox and smoke chamber where accessible, and vacuum so nothing drifts into the house.
- 3
Camera inspection and photo report. A camera runs the length of the flue, and we photograph what it sees. You get the images and a plain account of what’s sound, what’s worn, and what can wait.
- 4
Walk you through the findings. We go over the report with you and separate urgent from optional. Nothing is recommended without camera evidence you can look at yourself.
- 5
Quote any repair on a written estimate. If something needs fixing, you get a written estimate and a clear explanation of the materials – DuraFlex, HeatShield, Gelco – before anything is booked. Nothing is done without your say-so.
How Much Does Chimney Sweep Cost in Enterprise?
A typical chimney sweep in Enterprise runs $150-$300 depending on the appliance, the flue type, and how much buildup is inside. Gas fireplace cleaning and inspection usually lands in the same range. A chimney repair is quoted per job on a written estimate once the inspection is done, and a liner or resurfacing job is a larger number for a reason: it’s structural, not cosmetic. We don’t discount materials to win a bid, because the material is the repair.
Several things move the price. A wood stove with a tight flue takes longer than an open fireplace. A flue with stage two or stage three creosote takes more time and sometimes more than one visit. Hard-to-reach caps and long offsets add labor. Gas fireplaces with complex media and glass take careful handling. None of that is hidden from you – it’s all visible on the estimate before we start.
The way to avoid overpaying is to ask for the inspection photos and the written estimate, then compare the findings against another quote. You can see what we saw. A reputable sweep will never tell you the flue is shot without showing you why.
Every estimate is free, flat-price, and agreed before the sweep is booked. The written estimate sets the final price – nothing gets added after the fact. Call (855) 752-5896 when you’re ready. We answer 24/7.
Our Service Area Near Enterprise
We serve Enterprise and the surrounding Las Vegas Valley, including chimney sweep service in Spring Valley, and we cover Henderson, Paradise, Sunrise Manor, North Las Vegas, Las Vegas, and Boulder City, with chimney sweep work also available toward Sandy Valley and Mount Charleston. Scheduling is by appointment with fast dispatch from 7am to 7pm, Sunday through Friday. Book online or call and we’ll set a day that works.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Enterprise
A chimney sweep is a trained specialist who cleans the flue, firebox, and smoke chamber of soot, creosote, and debris, then inspects the system for damage. It’s a trade of its own – our technicians do only chimney work – and it’s how you find out whether a flue is safe to burn in. A sweep is not the same as a general cleaning or a handyman visit. Call (855) 752-5896 for an exact quote – estimates are free.
A standard sweep usually takes 45 minutes to an hour and a half, depending on the flue length, how much creosote has built up, and whether the cap and firebox need extra attention. Gas fireplace cleanings and inspections are often quicker. We don’t rush it, because the inspection is the point. Call (855) 752-5896 to book a time – estimates are free.
A typical sweep in Enterprise runs $150-$300 depending on the appliance and buildup, and gas fireplace cleaning lands in the same range. Repairs are quoted per job from the inspection findings on a written estimate. The flat price is agreed before booking, so there’s no surprise at the door. Call (855) 752-5896 for an exact quote – estimates are free.
Yes. We service DuraFlex flexible liner systems, HeatShield resurfaced flues, Gelco caps, and Copperfield and Olympia Chimney parts, along with Famco ventilation components. We know where each one wears and how it ages. Whether your system uses one of these brands or another make, we can help. Call (855) 752-5896 – estimates are free.
Same-day appointments are often available, and the phones are answered 24/7 for booking. Fast dispatch runs from 7am to 7pm Sunday through Friday, and we’re closed on Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 752-5896 to get on the schedule – estimates are free.
Material performance follows the manufacturer’s warranty for the brand installed – DuraFlex, HeatShield, Gelco, and the rest. Workmanship terms are spelled out on your written estimate before the job is booked, so you know exactly what’s covered. We’ll answer any warranty question up front, before you commit to the work. Call (855) 752-5896 – estimates are free.
Clear the area around the hearth, move anything breakable off the mantel, and don’t light a fire for at least 24 hours before the appointment so the firebox is cool. Take the grate out if it lifts easily. Have a path to the fireplace clear for drop cloths and equipment. That’s it – we handle the rest. Call (855) 752-5896 to book – estimates are free.
Schedule Your Chimney Sweep Service in Enterprise Today
Book a sweep, repair, or inspection from one specialist and get a flat price, a camera inspection, and a photo report you can check. Our technicians have up to 13 years of experience, and we specify the materials by name. Call (855) 752-5896 for a free, no-obligation estimate – we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. See Chimney Sweep Enterprise for the full service overview, and our chimney sweep page for the local details.
Written by the team at Chimney Sweep Enterprise.