Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Enterprise Homeowners
Most chimney problems in Enterprise stay invisible until the first cold snap, when smoke backs into the room or a draft that worked last winter suddenly doesn’t. A professional inspection finds those problems early, while they’re still a repair instead of a rebuild. Our technicians have up to 13 years of experience and work only on chimneys, so the person inspecting your flue knows what a failing liner joint or a hairline crack in the crown actually looks like. We use camera equipment and a photo report you keep, and nothing gets recommended without evidence you can see yourself. Same-day appointments are often available in Enterprise. Call (855) 752-5896 to book your inspection.
Fireplace Inspection
Fireplace Inspection is a focused check of the firebox, damper, smoke chamber, and the visible parts of the flue that serve your fireplace, and it’s the right starting point when you’ve just moved into a home or haven’t burned a fire in a while. It’s also what we recommend before your first season of regular use, so you know the fireplace is safe before you rely on it. At Chimney Sweep Enterprise, the inspection is visual but thorough: we check clearances, look for cracked firebrick and deteriorated mortar joints, test the damper, and confirm the smoke chamber isn’t coated with creosote. If we find something, we can usually fix it the same visit with HeatShield resurfacing or a DuraFlex liner, so you’re not scheduling a second contractor. A fireplace inspection in Enterprise typically runs $75-$150, and the written report sets the final price. We answer 24/7 to book.
What We Examine in the Firebox
The firebox takes the most direct heat of any part of the chimney, and that’s where firebrick cracks and mortar erosion show up first. We check the firebox walls, the lintel, and the damper assembly, then note anything that needs repair before the next fire. Small cracks aren’t automatically a big job, but they do need to be watched.
Gas and Wood Fireplaces Differ
A gas fireplace still has a flue, and it still needs inspection, even if it never sees a log. Gas units can produce moisture and venting issues that look nothing like wood-burning problems. We adjust what we check based on what you actually burn.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole chimney as a system, from the cap and crown at the top down through the flue and into the firebox, and they’re what you want when you need a complete picture rather than a quick look. That means the exterior masonry, the flashing where the chimney meets the roof, the crown, the cap, the flue lining, and the interior components, all checked in one visit. At Chimney Sweep Enterprise, the same specialist handles the inspection, any cleaning, and any repair, so findings don’t get handed off to someone else. We check Gelco chimney caps and the flashing details that cause most leaks, and we photograph anything that needs attention. Chimney inspection services in Enterprise generally run $100-$250 depending on the level of inspection and the condition of the chimney. Call us to schedule; estimates are free.
Exterior and Interior Checks Together
Half a chimney inspection tells you half a story, so we look at the roof-level components and the interior in the same visit. Masonry cracks, spalling brick, and crown damage are all visible from the outside and matter as much as what’s inside the flue. You get a written summary covering both.

Report You Can Actually Read
We hand over a photo report in plain language, not a checklist of codes you have to decode. Each finding comes with a picture and a recommendation, and we’re honest about what can safely wait. That’s the part most homeowners tell us they appreciate.

Chimney Flue Inspection
Chimney Flue Inspection is a close look at the flue itself, the channel that carries smoke and gases out of your home, and it’s essential whenever you don’t know the condition of the liner. The flue is where creosote builds up, where liner joints fail, and where cracks let heat reach combustible framing. During a flue inspection we run a camera the length of the flue to check for gaps, cracks, broken tiles, or a liner that’s been improperly installed. Chimney Sweep Enterprise services DuraFlex flexible liner systems and knows how a properly installed liner should look, which means we can spot the shortcuts. A flue inspection in Enterprise typically costs $100-$200, and if a liner is needed, we’ll explain the options with the written estimate setting the final price. Call (855) 752-5896 to book.
Creosote Buildup and Glaze
Creosote comes in stages, from a light soot to a hardened, glazed coating that’s genuinely difficult to remove and highly combustible. We rate what we find so you know whether a standard sweep is enough or if the flue needs more attention. Glazed creosote is one of the main reasons chimney fires start.
Clay Tile Liners and Their Limits
Older flues are often lined with clay tile, which cracks over time as the chimney heats and cools. Once a tile cracks, gases can escape into the chimney structure. A camera inspection is the only reliable way to know whether those tiles are still intact.
Chimney Fire
Chimney Fire is the event every inspection is designed to prevent, and it’s why we take creosote seriously rather than treating a sweep as routine maintenance. A chimney fire happens when built-up creosote ignites inside the flue, and it can be loud and dramatic or slow and quiet, smoldering in a way a homeowner never notices. After any suspected chimney fire, the flue needs inspecting before the fireplace is used again, even if the fire seemed small. Chimney Sweep Enterprise inspects the flue after a fire, checks for cracked tiles, warped dampers, and damaged liner components, and recommends repair with HeatShield resurfacing or a DuraFlex liner when the flue is compromised. Post-fire inspection costs typically run $150-$300 depending on damage. If you’ve had a chimney fire, don’t burn again until it’s checked. Call us.
Signs You May Have Had One
A puffy, honeycombed texture on the creosote, warped metal components, cracked tiles, or a strong burned smell long after the fire are all signs of a past chimney fire. Sometimes the only evidence shows up on camera. If you notice any of these, an inspection is the next step.
Why the Flue Needs Checking Afterward
Heat from a chimney fire can crack tiles and distort a liner in ways that aren’t visible from the firebox. Those cracks let heat and gases reach framing, which is exactly the condition that starts a house fire. An inspection after the event is not optional.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is a more thorough inspection that includes a video scan of the entire flue plus a look at accessible parts of the chimney’s exterior and connections, and it’s the level most real estate transactions and post-event checks require. You need a Level 2 when you’re buying or selling a home, after a chimney fire or earthquake, after a change in fuel type or appliance, or when a Level 1 visual inspection turns up something that needs a closer look. It goes beyond what you can see from the firebox because the camera reaches the full length of the flue. At Chimney Sweep Enterprise, the Level 2 includes the camera scan, the photo documentation, and a written report you can hand to a buyer or an insurer. In Enterprise, a Level 2 inspection typically runs $150-$300 based on the number of flues and access. Estimates are free; call to book.
When a Transaction Requires It
Buyers and their agents often ask for a Level 2 before closing because a standard visual check can’t confirm the liner is sound. Having the report ready removes a common point of negotiation. We document what we find so the buyer knows exactly what they’re getting.
Scope Compared with a Basic Check
A Level 1 covers what’s visible without tools; a Level 2 adds the camera and access to concealed areas. The difference matters when the flue condition is unknown. We’ll tell you which level your situation actually calls for rather than upselling.
Chimney Leak
Chimney Leak is water getting into the chimney or the home around it, and it usually traces back to the flashing, the crown, or a failing cap rather than the masonry itself. Water damage is slow and quiet: it rots framing, rusts dampers, and erodes mortar, and by the time a stain shows on the ceiling the problem has usually been working for a while. It’s worth inspecting as soon as you notice a damp smell, a water stain near the chimney, or crumbling mortar on the exterior. Chimney Sweep Enterprise inspects the full water-shedding system, from the Gelco cap down through the flashing and crown, and identifies where the water is actually entering. Leak diagnosis in Enterprise typically costs $100-$250, and repairs are quoted separately with the written estimate setting the final price. Call (855) 752-5896 if you suspect a leak.
Flashing Is the Usual Suspect
Most leaks start at the flashing, the metal where the chimney passes through the roof. It pulls away, corrodes, or was installed without enough overlap, and water finds the gap. We check it closely on every inspection.
Crown Cracks and Cap Damage
A cracked crown lets water run down into the masonry, and a missing or damaged cap lets rain straight into the flue. Both are common in Enterprise and both are usually repairable before they cause structural damage. We’ll tell you which one is causing your leak.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera lowered through the flue so we can see the full length of the liner, including the sections no visual check can reach. It’s the tool that turns a guess into a diagnosis, and it’s the reason we recommend it whenever flue condition is unknown or a repair has been proposed. The camera shows cracked tiles, failed joints, gaps in a liner, heavy creosote, and obstructions like nests or debris, all on a screen you can watch with us. Chimney Sweep Enterprise includes the camera scan in Level 2 work and uses the footage to decide whether HeatShield resurfacing or a DuraFlex liner is the right fix. A camera inspection in Enterprise typically runs $100-$200, and you get photos from the scan. Book by phone; estimates are free.
What the Camera Reveals
The camera catches things the eye misses: hairline tile cracks, offset joints, and liner seams that have started to separate. Those are the conditions that let heat reach framing. Seeing them is the whole point.
Evidence Before Any Repair
No one should be told they need a liner without seeing why, and the camera footage is that proof. We show you the recording before we quote any repair, and we say plainly when work can wait. It’s your chimney and your decision.
Brands We Service
We work with DuraFlex flexible liner systems and know how those liners are specified and installed, which helps us recognize both a correct job and a shortcut. We also use HeatShield chimney resurfacing for repair work because it’s a system designed to extend flue life rather than paint over damage. When we inspect a chimney with either product installed, we know where to look for the wear points that matter.
We specify Gelco chimney caps and work with Copperfield components because trade-level parts hold up differently than what’s sold at retail. Our inspections cover these brands and everything else we find in Enterprise homes. Whether you have a DuraFlex liner, a HeatShield-resurfaced flue, a Gelco cap, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fireplace that won’t draft is telling you something is blocked, damaged, or sized wrong. It’s worth inspecting before the next fire, because the cause doesn’t fix itself.
- A strong creosote or burned smell. That smell often means heavy creosote is sitting in the flue, or that a past chimney fire left its mark. Both warrant a look.
- Water stains or a damp smell near the chimney. Water is getting in somewhere, and the longer it runs, the more it damages. A leak inspection finds the entry point.
- Crumbling mortar or cracked brick outside. Exterior masonry that’s breaking down lets water into the chimney structure. It’s a repair that gets more expensive the longer it waits.
- You just moved in or haven’t had it checked. Previous owners’ habits are unknown, and a first inspection establishes a baseline. It’s the cheapest way to avoid surprises.
Our Process, Step by Step
- 1
We talk through the history. What you burn, how often, whether you’ve noticed smoke, smells, or water. That context shapes where we look first. We’d rather ask than assume.
- 2
We inspect the accessible parts first. Firebox, damper, smoke chamber, and the exterior at roof level, checking clearances and masonry condition. Everything gets photographed as we go.
- 3
We run the camera. A video scan of the full flue shows the liner condition, creosote level, and any hidden damage. You watch the screen with us, so nothing is a mystery.
- 4
We write it up plainly. Findings come with photos and a clear recommendation on each item, including what can safely wait. Nothing is recommended without evidence in the report.
- 5
We quote and explain the options. If a repair is needed, we walk through the fix, whether that’s a DuraFlex liner or HeatShield resurfacing, and give you a written estimate. You decide with the whole picture in front of you.
How Much Does Chimney Inspection Cost in Enterprise?
A basic visual fireplace inspection in Enterprise typically runs $75-$150, a full chimney inspection with exterior and interior checks runs $100-$250, and a Level 2 inspection with the camera scan runs $150-$300. Post-fire and leak-diagnosis inspections usually fall in the $150-$300 range depending on what’s found.
What drives the price is the level of inspection, the number of flues, how accessible the chimney is at roof level, and whether the flue needs cleaning before the camera can see properly. A chimney with heavy creosote takes longer to inspect, and that’s reflected in the quote. A straightforward single-flue home in good condition sits at the low end.
The way to avoid overpaying is to know what you’re buying before you book. Ask which inspection level you’re getting, whether the camera is included, and whether you’ll get a written report with photos. That’s what separates a real inspection from a quick look. Every estimate we give is free, itemized, and sets the final price before any work begins. We also say clearly when a recommended repair can wait, because a chimney professional who tells you the truth about timing is one you can call again next year.
Our Service Area Near Enterprise
We inspect chimneys across Enterprise and the surrounding valley, including Paradise, Henderson, Sunrise Manor, Las Vegas, North Las Vegas, and out toward Sandy Valley and Mount Charleston. Homes closer to the valley floor are usually scheduled quickly, and we can often reach nearby neighborhoods the same day. For a full picture of what we handle, see Chimney Sweep Enterprise. If you’re in Enterprise, Boulder City, or Spring Valley, call and we’ll book an inspection that fits your schedule. We answer 24/7.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Enterprise
A chimney inspection is a professional evaluation of your chimney’s condition, from the firebox and flue to the cap, crown, and exterior masonry. It identifies creosote buildup, cracks, liner damage, and water intrusion before they become expensive or dangerous. We inspect with a camera and document findings with photos so you can see the evidence yourself. Call (855) 752-5896 to book one.
Most inspections take 45 minutes to an hour and a half, depending on the level and how many flues your chimney has. A basic visual check is on the shorter end, while a full Level 2 with camera scan and exterior access takes longer. If the flue needs cleaning first, allow extra time. Call for an exact quote; estimates are free.
Chimney inspection in Enterprise typically costs $75-$300 depending on the level, the number of flues, and access. A basic fireplace inspection is at the low end, and a Level 2 with camera scan sits at the top. The written estimate sets the final price before any work begins. Call (855) 752-5896 for an exact quote; estimates are free.
Yes, we service DuraFlex flexible liner systems and inspect them regularly. We know how a proper DuraFlex installation should look and where those liners wear, which helps us spot shortcuts and spot failures early. If your inspection turns up a liner problem, we’ll show you the footage and explain the options. Call us to schedule.
Same-day inspections are often available in Enterprise, and we dispatch Sunday through Friday, 7am to 7pm, closed Saturday. We answer 24/7, so a call outside dispatch hours is booked into the next opening. Call (855) 752-5896 and we’ll find a time that works.
We stand behind our work and the materials we install, and warranty terms depend on the product and the job. We’ll explain what’s covered in writing with your estimate, so there’s no ambiguity. Ask us when you call and we’ll go through it clearly.
Clear the area around the fireplace and make sure we can reach the roof access if there is one. Don’t burn a fire for at least 24 hours before the appointment so the flue is cool enough to inspect. Tell us about any smoke, smells, or water you’ve noticed, since that guides where we look first. Call (855) 752-5896 to book.
Schedule Your Chimney Inspection Service in Enterprise Today
An inspection is the cheapest insurance your chimney has, and in Enterprise it’s the right move before the burning season starts. Call (855) 752-5896 to book a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a camera inspection, a photo report, and a straight answer on what needs doing now and what can wait.
Written by the team at Chimney Sweep Enterprise.